Get your S.A.M. device online and connected to a TV.
What you need
- S.A.M. device and power cable
- Internet connection by Ethernet or a configured ENS Wi-Fi hotspot
- HDMI extender
- TV with an available HDMI port and its remote control
1. Set up power and network access
- Connect the device to a wall outlet using the power cable.
- Check the front of the device for a solid or blinking blue light.
- Connect the device to the internet using one of these options:
- Ethernet: Connect an Ethernet cable directly from the device to your router.
- Wi-Fi: Enable the configured ENS hotspot on your phone or computer and wait for the device to connect.
2. Connect the device to your TV
- Keep the device connected to power.
- Plug the short HDMI extender into the device’s HDMI port.
- Insert the free end of the extender into an available HDMI port on the TV.
- Use the TV remote to select the corresponding HDMI input, such as HDMI 1.
Expected result
The device has power, is connected to the internet, and displays through the selected HDMI input on the TV.
Troubleshooting
- No blue light: Check the power cable, connections, and wall outlet.
- The TV shows “No Signal”: Confirm the HDMI extender is securely connected and select the correct HDMI input.
- Wi-Fi does not connect: Confirm the ENS hotspot name and configured access details, and make sure the hotspot remains active on your phone or computer.
For more setup and training resources, visit EditNew Support.
About EditNew
Editnew Inc. is a technology company specializing in new media, with a focus on digital signage and emergency communication solutions. We help organizations and reseller partners deploy, manage, and support reliable information and notification systems.
Media Contact
Jeremiah Archambault info@editnew.ca +1 250 999 9368